For neoprene and wetsuit repair.
McNett Aquasure Urethane Repair Adhesive & Sealant, the industry standard for maximum strength repairs to wetsuits,drysuits,kites,inflatables, waders and many watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses.
DIRECTIONS FOR NEOPRENE REPAIR:
Clean damaged area with fresh water ( if not already done, after wetsuit was last worn), and allow to dry thoroughly.
Trim loose threads, if any. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquasure to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.
Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs.
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with McNett Aquasure. Remove tape after full cure.
SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.
This small sum lets us know that you are genuinely enquiring and not a computer trying to send excess amounts of spam to our email account.